Principle overview:
Pipe chain conveyor is a continuous conveying equipment for conveying bulk materials such as powder, small granular and small blocks. It can be conveyed horizontally, inclined and vertically in combination. In a closed pipeline, the chain is used as the transmission component to drive the material to move along the pipeline. When conveyed horizontally, the material particles are pushed by the chain in the direction of movement. When the internal friction between the material layers is greater than the external friction between the material and the pipe wall, the material will move forward with the chain piece, forming a material flow; when transported vertically, the material particles in the pipe are pushed upward by the chain piece because the lower part feeds the material It prevents the upper material from sliding down and generates lateral pressure, thereby enhancing the internal friction of the material. When the internal friction between the materials is greater than the external friction between the material and the inner wall of the pipe and the material's own weight, the material will be transported upward with the chain, forming a continuous material flow. 

Features:
1. The structure is compact and the conveying direction can be changed in three dimensions.    

2. Fully enclosed conveying, no dust spillage, clean and environmentally friendly.    

3. During the material transportation process, the energy consumption is low and the operating cost is reduced to the maximum extent.    

4. The horizontal conveying distance can reach 60 meters, and the vertical lifting height can reach 40 meters. Capacity up to 300 m3/h.    

5. There is no dead zone in the transportation pipeline.    

6. No metal friction, reducing noise to the greatest extent.   

7. Low maintenance cost.
8. Long service life.

9. Explosion-proof design and air-tight design.

10. Can be reloaded and started.

11. Ensure the integrity of materials to the greatest extent.

 Product advantages:

1. Volumetric conveying device, which can realize conveying and measuring of materials. It is easy to realize centralized control, improve the degree of automation, and meet the requirements of modern enterprises for environmental protection.    

2. It has a compact structure, takes up little space, and can change the conveying direction in three dimensions.    

3. The conveyed material is in a sealed state from the inlet to the outlet flange. There is no need to install a dust collector at the outlet. It can be filled with gas when conveying materials. It can be ensured that no dust leaks into the environment during transportation.    

4. The material is transported smoothly along the pipe with basically no internal movement, so the material is less damaged. The slow curved transportation causes very few material particles to produce debris.    

5. According to different feeding conditions, the distance between the inlets can be more than 10 meters.    

6. The sprockets have optimized shoulders and are optimized for use with hardened chains with less wear.    

7. Special conveyor plate with very low friction coefficient and strong conveying capacity.    

8. All pipe chain conveyors we produce use self-developed calculation programs to maintain the necessary static friction and tensioning force on different components such as the conveyor pipes and curved parts, providing highly accurate data for designing low noise and low wear.